European Glove Standards for Protective Gloves
We devoted ourself to regulation standards. Glove from Raymond safety has been certifide as per the PPE 89/686/EEC Directive and relevant EN standards, and is CE marked.
EN374 - Chenical protection or micro-organisms Micro-organisms
Acceptable liquid penetrate quality standards. The lower the index represents the better quality.
| PERFORMANCE LEVELS | 1 | 2 | 3 |
| AQL | 4.0 | 1.5 | 0.65 |
Chemical Protection
Breakthrough time > 30 min.For at least 3 chemicals from this list:(XYZ represent the code letter for 3of these chemicals for which the glove obtained>30min.Breakthrough time)
- AMethanol
- BAcetone
- CAcetonitrile
- DDichloromethane
- ECarbon disulphide
- FToluene
- GDiethylamine
- HTetrahydrofurane
- IEthyl acetate
- Jn-Heptane
- KSodium hydroxide 40%
- LSulphuric acid 96%
| PERFORMANCE LEVELS | 0 | 1 | 2 | 3 | 4 | 5 | 6 |
| Minutes | <10 | 10 | 30 | 60 | 120 | 240 | >480 |
Chemical resistance against chemicals of choice (AQL <4)
Thispictogram can be used for gloves that don't meet the above requirement and have an AQL of 4 or lower.
EN388 - Mechanical Protection
| PERFORMANCE LEVELS | 1 | 2 | 3 | 4 | 5 |
| A. Abrasion resistance(cycles) | 100 | 500 | 2000 | 8000 | / |
| B. Contact heat(cont Temp & threhold time) | 1.5 | 2.5 | 5.0 | 10.0 | 20.5 |
| C. Tear resistance(Newton) | 10 | 25 | 50 | 75 | / |
| D. Puncture resistance(Newton) | 20 | 60 | 100 | 500 | / |
EN4O7 - Heat Protection
| PERFORMANCE LEVELS | 1 | 2 | 3 | 4 |
| A. Burning behavior (after flame & after glow time) | <20s No. requir | <10s <120s | <3s <25s | <2s <5s |
| B. Contact heat (cont.Temp.& threhold time) | 100oC > 15s | 250oC > 15s | 350oC > 15s | 500oC > 15s |
| C. Convective heat (heat transfer delay) | > 4s | > 7s | > 10s | > 18s |
| D. Radiant heat (heat transfer delay) | > 7s | > 20s | > 50s | > 95s |
| E. Small drops molten metal (#drops) | > 10s | > 15s | > 25s | > 35s |
| D. Large quantity molten (mass) | 30 g | 60 g | 120 g | 200 g |
EN420 - General Requirements
This pictogram indicates that the user has to consult the instructions for use.
EN421 - Radioactive Contamination + Loizing Radiation
Gloves protecting form direct contact with radio-active substances.
Gloves protecting from direct contact with radiations (X-ray,Alpha-,Beta-,Gamma- or Neutron radiation)
EN511 - Cold Protection
| PERFORMANCE LEVELS | 1 | 2 | 3 | 4 | 5 |
| A. Convective cold. Thermal insulation ITR in m2. oC/W | 1<01.0 | 0.10<1<0.15 | 0.15<1<0.22 | 0.22<1<0.30 | 0.30<1 |
| B.Contact cold. Thermal resistance R in m2.°C/W | R<0.025 | 0.025< R< 0.05 | 0.015< R< 0.1 | 0.1< R< 0.15 | 0.15< R |
| C.Water penetration test Fail Pass | Fail | Pass | / | / | / |
Hand Size Guide
| SIZE | SIZE | LENGTH |
| XS | 6 | 220 |
| S | 7 | 230 |
| M | 8 | 240 |
| L | 9 | 250 |
| XL | 10 | 260 |
| XXL | 11 | 270 |
Safe Hands © All Rights Reserved - 2019. Designed by Mars Web Solution.